Bơm Xăng Dầu | Đồng Hồ Lưu Lượng | |
22/50/16, đường 990, phường Phú Hữu, Quận 9, TP HCM | |
Công ty thương mại | |
Mr. Phuong | |
Click vào để xem số điện thoại | |
Click vào để xem địa chỉ email |
ID: | 2105 (Hoàng Phương) |
Lượt truy cập: | 71,705 |
Số sản phẩm: | 685 |
Tham gia: | 2014-03-14 20:51:08 |
Click vào hình lớn để xem ảnh phóng to
Dầu chống dính khuôn NABAKEM R-2 |
|
Giá: | Chưa được cập nhật |
Thông tin tồn kho: | Chưa được cập nhật |
Lượt mua: | Đang cập nhật |
Lượt xem: | 5.392 |
Mold
Release R-2 (Mold Release for 2nd Processing) is a paintable release
agent developed by our unique design. This product has best release.
Ideal for delicate and precise mold. No residues are remained. Using
this product, defect occurrence ratio is reduced. Also, quality
improvement, work hour reduction and cost saving are obtained.
Additionally, it is used widely for polishing, surface protection and
lubrication. |
Epoxy resin, phenol resin, melamine resin, rubbers, engineering plastics, ABS resin, PVC resin |
• Clean foreign substances, carbon and injection molding residues with NABAKEM PMC-3(powerful mold cleaner). • Spray it evenly with 20~30cm away from mold |
• Do not use it toward fire. • Do not use near heater or stove. • Do not use in the room using fire. • Do not keep it in the place above 40℃. • Provide ventilation to use it in the closed room. • Do not throw it away into fire. • Punch the can to throw it away. • Do not keep it in the closed place. • Spraying may not work well below 5℃. |
Click vào hình lớn để xem ảnh phóng to
Dầu chống dính khuôn NABAKEM R-2 |
|
Giá: | Chưa được cập nhật |
Tồn kho: | Chưa được cập nhật |
Lượt mua: | Đang cập nhật |
Lượt xem: | 5.392 |
Mold
Release R-2 (Mold Release for 2nd Processing) is a paintable release
agent developed by our unique design. This product has best release.
Ideal for delicate and precise mold. No residues are remained. Using
this product, defect occurrence ratio is reduced. Also, quality
improvement, work hour reduction and cost saving are obtained.
Additionally, it is used widely for polishing, surface protection and
lubrication. |
Epoxy resin, phenol resin, melamine resin, rubbers, engineering plastics, ABS resin, PVC resin |
• Clean foreign substances, carbon and injection molding residues with NABAKEM PMC-3(powerful mold cleaner). • Spray it evenly with 20~30cm away from mold |
• Do not use it toward fire. • Do not use near heater or stove. • Do not use in the room using fire. • Do not keep it in the place above 40℃. • Provide ventilation to use it in the closed room. • Do not throw it away into fire. • Punch the can to throw it away. • Do not keep it in the closed place. • Spraying may not work well below 5℃. |
Bơm Xăng Dầu | Đồng Hồ Lưu Lượng | |
22/50/16, đường 990, phường Phú Hữu, Quận 9, TP HCM | |
Công ty thương mại | |
Mr. Phuong | |
0936 766 665 | |
pusicovietnam@gmail.com | |
Gian hàng nhà cung cấp |
683 sản phẩm