Digital torque checker, ADT-C200 ,ATTONIC ADT-C200 Attonic | Chợ Mua Bán Thiết Bị Công Nghiệp

Click vào hình lớn để xem ảnh phóng to

Digital torque checker, ADT-C200 ,ATTONIC
Giá:	Chưa được cập nhật
Thông tin tồn kho:	Hàng có sẵn
Lượt mua:	Đang cập nhật
Lượt xem:	5.530

Mô tả sản phẩm:

IIt is a high performance, precision, and easy-to use torque inspection instruemnt.

- Feature
It is mainly used to check the torque of electric driver.Of course, it can be used to check manual torque wrenches.
Common + bit can be used for checking with standard equipped attachment.
To correspond to customer's special bit, we will do a special processing.
(Additional cost will be charged. Please inquire. )

You can choose appropriate measuring range from 8 models from 1N･cm(0.1kgf･cm) to 20N･m(200kgf･cm) according to required torque.
The measuring torque value conforms to the torque data of Torque Analyzer (torque analysis system).
The digit number switch function ( 3 digits /4 digits ) was added under many customers’expectation.

Following functions are normally equipped .
・Digimatic output (printer output)
・RS-232C output
・Comparator output
・Analog output

- Accessory
・AC adaptor (IN:AC100V-240V OUT:DC12V 1A) 1 piece
・Attachment for driver 1 piece
・Attachment for electric driver 1 piece
・Screw (Excluding a special attachment) for the attachment 2 pieces for each.

- Standard issue

Unit of measurement	N･m(N･cm)/kgf･cm/in･lb
Accuracy	±0.5%F.S.
Measurement method	Peak holding (maximum value)/tracking(present value)
Peak holding	Digital analog holding
Response speed	MAX.1mS
Display	Four digit LCD
Permissive load	120％
Power supply	Chargeable battery Ni-MH(For four charging time hours. )
Basic machine weight	About 3.2kg

Model	Range of measurement display	Range of minimum display	Attachment
ADT-C1	1.000～10.00Ｎ・cm/0.100～1.000kgf・cm/0.100～1.000in・lb	0.001Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C2	2.00～20.00Ｎ・cm/0.200～2.000kgf・cm/0.200～2.000in・lb	0.01Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C5	5.00～50.00Ｎ・cm/0.500～5.000kgf・cm/0.500～5.000in・lb	0.01Ｎ・cm/0.001kgf・cm/0.001in・lb	TC-2、 TSS-5
ADT-C10	0.100～1.000Ｎ・m/1.000～10.00kgf・cm/1.000～10.00in・lb	0.001Ｎ・m/0.001kgf・cm/0.001in・lb	TC-3、 TSS-10
ADT-C20	0.200～2.000Ｎ・m/2.00～20.00kgf・cm/2.00～20.00in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-3、 TSS-20
ADT-C50	0.500～5.000Ｎ・m/5.00～50.00kgf・cm/5.00～50.00in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-6、 TSS-30
ADT-C100	1.000～10.00Ｎ・m/10.00～100.0kgf・cm/10.00～100.0in・lb	0.001Ｎ・m/0.01kgf・cm/0.01in・lb	TC-4、 TSS-30
ADT-C200	2.00～20.00Ｎ・m/20.0～200.0kgf・cm/20.0～200.0in・lb	0.01Ｎ・m/0.1kgf・cm/0.1in・lb	TC-4、 TSS-30

- Function explanation
Setting of each function can be operated by pushing “FUN”button for seconds.
Returning to measuring mode is also operated by pushing “FUN”button for seconds.

1. Setting of peak holding mode/tracking mode
Peak holding: The maximum value of measurement is displayed.
Tracking: The value of present measurement is displayed.
2. History of memory data
It is automatically memorized in the internal storage memory by pushing RESET button at peak mode .
(The value when the RESET button is pushed is memorized. )
3. Comparator setting
The display of HI/LO appears to the display by setting the upper bound value and the lower bound value.
(When the comparator output of the option is adhered, three kinds of judgments of HI/GO/LO are displayed by this set value. )
when the comparator output of the option has adhered. )
4. Setting at each measurement
3 kinds of unit {N･m(N･cm)/kgf･cm/in･lb} can be set.
5. Setting of overload
”Overload”indication can be displayed by setting maximum limit value of the result.
(Maximum limit value of the result can be basically set at percentage of the limit value. It cannot accept over 110% of the limit value. )
Example ･･･ When you measure the torque of fastening a work with appropriarte attachment, you can use this function to hold the measurement just before breaking the work by setting perticular limit value.
6. Auto power OFF setting
It is a function that the unit is turned off automatically when it doesn’t work for over five minutes.
If the function isn’t set, the unit isn’t turned off until battery shortage display is indicated.
7. Digit number switch setting
Its digital indication can be selected from 3 digits or 4 digits.
8. Reversing setting of display
It is a function that the display can be displayed reversely.
9. Battery shortage display
The battery line decreases when the battery decreases.
"BATT" appears in display when the battery line disappears.

Gian hàng chuyên nghiệp Gian hàng chuyên nghiệp Là nhà cung cấp đã xác thực thông tin với ChoCongNghiep.Com. Là nhà cung cấp có sản phẩm đăng đa dạng, đầy đủ và chính xác trên website ChoCongNghiep.Com. Là nhà cung cấp có quá trình hoạt động lâu dài tại ChoCongNghiep.Com.

	Attonic

	778, Xô Viết Nghệ Tĩnh, P. 25, Q. Bình Thạnh, TP. HCM, P. 25, Q. Bình Thạnh, TP. Hồ Chí Minh
	Công ty thương mại
Ms Vi Chức vụ: Nhân viên kinh doanh
	Click vào để xem số điện thoại
	Click vào để xem địa chỉ email
	Xem gian hàng nhà cung cấp

Gian hàng chuyên nghiệp Gian hàng chuyên nghiệp Là nhà cung cấp đã xác thực thông tin với ChoCongNghiep.Com. Là nhà cung cấp có sản phẩm đăng đa dạng, đầy đủ và chính xác trên website ChoCongNghiep.Com. Là nhà cung cấp có quá trình hoạt động lâu dài tại ChoCongNghiep.Com.
	Attonic
	778, Xô Viết Nghệ Tĩnh, P. 25, Q. Bình Thạnh, TP. HCM, P. 25, Q. Bình Thạnh, TP. Hồ Chí Minh
	Công ty thương mại
Ms Vi Chức vụ: Nhân viên kinh doanh
	Click vào để xem số điện thoại
	Click vào để xem địa chỉ email
	Xem gian hàng nhà cung cấp